How to distinguish the degree of damage to forklift parts

        The forklift has damage to the degree of damage to the parts during work. In the use of the forklift, we need to judge the damage of the parts to distinguish the damage in use.

The impact of forklifts, so what methods can be used to determine the degree of damage to parts?

1. The impact on performance and operating mechanism: some parts after wear, although they can still complete the function, but reduce the performance, such as transmission gear

After the wheel is worn, the predetermined torque and speed can still be transmitted, but due to the large gap, the noise increases and the efficiency decreases, so that the smoothness of the transmission is broken.

If it is damaged, it must be repaired or replaced according to the degree of wear.

2. Impact on efficiency: When parts are worn out, it will lead to a decrease in efficiency. The wear of parts such as cylinders will affect the efficiency of the engine.

It should be decided whether to repair or replace certain parts according to the specific conditions of wear.

3. Although the wear degree of general parts has exceeded the tolerance, but it has not exceeded the sub-level matching tolerance, it can continue to be used.

4. The economics of the repair method of the parts: under the premise of ensuring the quality of the repair, the ratio of the repair cost to the service life after repair is lower than the new zero after replacement

The ratio of the cost of manufacturing (or outsourcing) parts to the service life of new parts after replacement.

5. The parts cannot be used due to wear and tear, such as the clutch loses the function of transmitting power, the hydraulic parts cannot reach the predetermined pressure, and the

The air distribution system of the wheel cannot maintain the predetermined law of motion. If the above situation occurs, it must be replaced or repaired.

6. In the forklift maintenance process, the repair or replacement is determined based on whether it has the technological ability and conditions to repair the worn parts.

【 Go Back 】 | 【 Print 】